Audio Monitoring (Listen, Whisper, and Barge)

Audio Monitoring (Listen, Whisper, and Barge)

Concept

Audio monitoring is a phone feature that allows Call Center Supervisors to join a call (barge), whisper to their agent, or choose to listen into the call.

Types of Audio Monitoring

  • Join Call (Barge) - Allows the supervisor to join the call, rather than just listen, as is the case with Listen Only, or speak to only one of the parties, as is such with Whisper (on-net User only). Join Call allows the User joining the call to have a conversation with both the agent and the caller they are speaking with.
  • Listen Only - Allows the supervisor to listen in only, hearing both sides of a call, but not be heard by either of the other parties. By default, the Listen Only option is selected when a connection is made, so both the Agent (on-net User) and Caller (off-net caller) will be unaware of the listener. 
  • Whisper - Allows the supervisor to listen in to the call and speak to the agent only while the caller will not hear any audio from the supervisor.


Rules

  • The audio monitoring features mentioned in this guide are available to users with a scope of Call Center Supervisor or higher.
    As a general rule, the scope of the user listening must be higher than the scope of the agent in the call. For instance, a Call Center Supervisor will not have the option to listen in to another Supervisor's call, but they can listen in to the calls of Call Center Agents.
  • Join Call (Barge) & Listen Only are available on all calls (with the correct scope), regardless of whether the call is on-net to on-net or on-net to off-net.

  • Whisper only works for a call by an agent/employee (on-net) connected to a caller that is off-net. The call can be inbound or outbound.


Making the Connection

Note: Basic Users are not able to monitor calls.

To start the connection as a Call Center Supervisor:

  1. Click on the Call Center tab from the PBX main menu.
  2. Hover over the name of the agent you want to monitor in the Agents table found in the lower right area of the Call Center screen and click on the Audio Monitoring icon. It may take 1 or 2 seconds to show the icon.
  3. An Audio Monitoring box will appear on the bottom right of your screen, allowing you to initially listen to the conversation between the agent and the caller.
  4. From the Audio Monitoring box, you can choose either:
    1. Join the call or Barge in by clicking on the Join Call button.
    2. Whisper to the agent by clicking on the Whisper to (agent extension) button.
    3. Return to just listening to the conversation between the agent and the caller by clicking the Listen Only button.

Note: If the Listen Only button is not showing, you are already in Listen Only mode due to clicking on the Listen-In button.


Using the DTMF Audio monitoring feature

It may also be set up that a user can dial-in a code to use these features for an ongoing call.  You will need to request from Support that the DTMF Audio monitoring feature is set up for a domain. Note that there is a $25 setup fee per domain.

By default, the setup will only allow Office Managers and Resellers access to this feature. However, we can limit and allow only specific users (user extensions) access to this feature.

To use the DTMF Audio monitoring feature, please follow the steps below:

  1. While an agent/user is on a call, dial the “Tapping” code (ex. 007) plus the extension to monitor. If for example, the Office Manager user wanted to monitor the agent whose extension is 1000, then the user will dial 0071000. This will initiate the tap, in Listen Only mode.
    • If there is more than one active call owned by the agent you want to monitor then the system will pick the first call that is NOT on hold.
    • If there are no associated calls owned by the agent that are NOT on hold, the system returns a "Not Found" response.
  2. After the monitoring has been initiated then toggling between modes is now available.  
    • To Barge-In to the conversation, dial the star code for Barge-In  *79 to create the duplex audio required.
    • To Whisper only to the system agent, dial the star code for Whisper *78 to toggle the tap session to whisper only to the system agent.
    • To return to Listen-In only, dial the star code for Listen-In *77 to toggle the tap session back to listen-in only, removing the ability for the system agent and their caller to hear the monitoring user.
  3. To end the session, simply hang up.



    • Related Articles

    • Call Center Monitoring

      Overview The Call Center solution provides the monitoring tools and reporting capabilities needed to manage a typical call center operation. The focus of this capability is found in the PBX portal when logged in using the Call Center Supervisor role. ...
    • Announce Callers or Wait Times for a Call Queue

      Call queues often have a configuration to announce the number of callers waiting or to announce expected wait times. It is possible to use one of these settings but not both. The setting for announcements is not found on the queue itself but can be ...
    • Call Center Agent Announcements

      Announce to Agent is a powerful way to further assist Queue Agents in preparing for and effectively handling calls. This feature allows the system to play a message before the Queue dispatches the call to the Agent, providing Queue Agents with ...
    • Zoho Integration User Guide

      Introduction Croo Extension for Zoho enhances your Zoho experience by integrating advanced telephony features directly into your Zoho Apps. This integration allows your team to communicate more efficiently with customers, offering a seamless ...
    • Accessing Voicemail

      The Default Voicemail numbers are: 5000 Internal from any extension on the PBX (User will be prompted for their extension number and password). 5001 Internal from the extension of the User checking Voicemail (the user will only be prompted for a ...